Split System Installation Cost in Newcastle: What’s Included and What Costs Extra
Electrical Upgrades

Split System Installation Cost in Newcastle: What’s Included and What Costs Extra

By a licensed Newcastle electrician5 min readUpdated 18 November 2026

Most split system quotes in Newcastle land within a fairly predictable range. What makes one quote higher than another is usually the install rather than the unit, and you can check most of those things before you buy.

The short answer

A split system installation in Newcastle typically costs about $665 to $1,425 for install only if you’ve already bought the unit, or about $1,150 to $2,650 supplied and installed for a 2.5kW or 3.5kW unit, based on published market pricing for Newcastle, checked in November 2026. Long pipe runs, upstairs rooms, and switchboard work sit on top of that. A site check turns the range into a written quote for your air conditioning installation.

Typical Split System Installation Costs in Newcastle

JobPrice range (incl. GST)
Install only (you supply the unit)$665 to $1,425
2.5kW, supplied and installed$1,150 to $2,375
3.5kW, supplied and installed$1,325 to $2,650
5kW, supplied and installed$1,700 to $3,325
7kW, supplied and installed$2,100 to $4,275
Like-for-like changeover, old unit removed$1,425 to $2,850
Removal and disposal of an old unit$95 to $330

Prices include GST and were checked in November 2026. They’re market ranges that can change, to help you check a quote, not my prices.

The spread within each row mostly comes down to the unit’s brand and features, and how straightforward the install is. That’s why two fair quotes for the same 3.5kW unit can differ noticeably when one is for a ground-floor wall and the other for an upstairs bedroom.

What a Standard Back-to-Back Install Includes

Most quoted base prices assume a back-to-back install: the indoor unit on one side of an external wall and the outdoor unit directly behind it on the other. A standard install usually covers:

  • Mounting the indoor unit and the outdoor unit on a wall bracket or ground pad.
  • Coring one hole through the wall for the pipes, cable and drain.
  • A short length of insulated copper pipe and interconnecting cable.
  • Running the condensate drain to a suitable spot outside.
  • Pressure testing, evacuating the pipework, and commissioning the system.

What it often doesn’t cover is the power. Some installers quote the unit and pipework only and leave the electrical connection to someone else, so check whether the circuit, the isolator and the compliance certificate are in the price.

What Costs Extra

These are the items that push a quote above the base price:

  • Long pipe runs. When the outdoor unit can’t sit behind the indoor one, each extra metre of pipe, cable and cover adds cost.
  • Second-storey rooms. An upstairs indoor unit often means a long run down the outside wall, a high bracket or a roof mount.
  • Brick, block or double brick walls. They take longer to core than weatherboard or fibro.
  • A dedicated circuit. If the unit needs a new circuit from the switchboard, that’s cable, a breaker and labour.
  • Switchboard capacity. A full board, or an old one with ceramic fuses, may need work before it can take the load. Switchboard upgrade costs are covered separately.
  • Removing an old unit. Disposal is extra unless the quote says otherwise.
Bought a split system? Book the install

Send the model number, a photo of your switchboard and where you’d like both units, and I’ll quote the install with the circuit and any extras listed.

Split system installation · Newcastle, Lake Macquarie and Maitland
0450 406 450

How Long Split System Installation Takes

A split system install usually takes about 3 to 6 hours. A back-to-back install on a single-storey home sits at the short end. Upstairs rooms, long pipe runs, brick walls and a new circuit push it towards the long end, and a switchboard upgrade can add more time again.

The bigger delay is often getting a booking. Summer is peak season, with longer waits and sometimes higher prices, so booking in autumn or winter usually helps. If you buy a unit in a December sale, ask for an install date before you pay for it.

Coastal Homes: Where to Put the Outdoor Unit

In Merewether, Stockton, Swansea and other suburbs close to the water, salt air is the biggest threat to the outdoor unit.

Some manufacturers’ installation manuals say to keep the outdoor unit out of direct sea wind, place it on the side of the house away from the ocean, and rinse salt off the coil at least once a year. A few practical steps help:

  • Put the outdoor unit on the sheltered side of the house where you can.
  • Use galvanised or stainless brackets and fixings rather than plain steel.
  • Ask whether the unit you’re buying has a protective coating on the outdoor coil for coastal areas.
  • Book a yearly air conditioner service that includes washing the outdoor coil.

Sizing the Unit for the Room

Size changes the price twice: once in the unit itself, and again in the install. Supplied and installed prices rise with size, from about $1,325 to $2,650 at 3.5kW to about $1,700 to $3,325 at 5kW, and larger units are more likely to need a dedicated circuit and a ground pad or a heavier bracket.

The kilowatt figure on the box is a starting point, not a measurement of your room. Ceiling height, insulation, west-facing glass, and a tin roof all change what the room needs. Before you buy online, get the room checked so you don’t pay to install the wrong size and then pay again to swap it. If an existing unit has simply stopped cooling, it may be worth getting an air conditioner repair quote before replacing it.

Questions to Ask Before You Buy Online and Book an Installer

Buying the unit yourself and paying for installation only can save money, but only if the installer and the unit match. Before you book an air conditioning installer, ask:

  1. Is the unit the right size for the room, and has anyone checked?
  2. How many metres of pipe are included, and what does each extra metre cost?
  3. Is the electrical connection included, with a new circuit and isolator if needed?
  4. Who handles the refrigerant, and do they hold an Australian Refrigeration Council licence?
  5. Will I get a Certificate of Compliance Electrical Work (CCEW) for the wiring?
  6. Does the unit’s warranty set conditions on who installs it, and does the installer warrant their own work?
Split system installation across Newcastle

Supply and install, or install only for a unit you’ve already bought, with the circuit and isolator done properly and the paperwork handed over.

Supply and install · Install only · Newcastle, Lake Macquarie and Maitland
0450 406 450

Frequently Asked Questions

How much does it cost to install an aircon in Newcastle?

Published market pricing puts install only at about $665 to $1,425 and a supplied and installed 2.5kW or 3.5kW split system at about $1,150 to $2,650.

Is it cheaper to buy the air conditioner online and pay for install only?

Often, yes, if the unit is the right size and the install is simple. Check that the installer will fit a customer-supplied unit and what warranty they give on the work.

How long does it take to install a split system?

Usually 3 to 6 hours. Upstairs rooms, long pipe runs, and new electrical work take longer.

Will I need a switchboard upgrade for a new air conditioner?

Not always. It depends on space on the board, safety switch protection, and the total load once the new unit is added. An older board with ceramic fuses usually needs work first.

How much does ducted air conditioning cost in Newcastle?

Published market pricing puts a basic ducted system at about $7,600 to $13,300 and a premium zoned system at about $11,400 to $20,900. Ducted is a separate quote after a roof space and switchboard check.

Get the Install Priced Before Summer

A split system quote is easiest to compare when you know what’s in the base price and what’s extra. Get the room, the wall and the switchboard checked, and book before the first heatwave. For split system installation in Newcastle, Lake Macquarie or Maitland, call 0450 406 450.

Written byLicensed electrician, Newcastle Electrical

Licensed electrician working across Newcastle, Lake Macquarie and Maitland. Every job comes with a written price before work starts.

Related Posts

View all posts
Let’s get it sorted

Get a quote for your electrical job

Tell us what needs doing and your suburb. Call 0450 406 450 or send a quote request below.

Need help urgently?Call the 24/7 electrical enquiry line.0450 406 450

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Call now