NEWCASTLE · LAKE MACQUARIE · THE HUNTER
Brighter rooms, lower lighting costs and lights that suit the way you live, installed and tested by a licensed Newcastle electrician.
Professional electrical work.
Know the scope before work starts.
Work checked before handover.
Work area left tidy.
A few details now. A written quote after we confirm the job.
No instant prices or booking commitment. Your electrician confirms the scope and availability.
LIGHTING SERVICES
From a single fitting to a whole-home lighting upgrade. Choose the work you have in mind.
Plan brighter rooms with a practical downlight layout or replace hot halogens with efficient LEDs. We check existing holes, insulation ratings, wiring and switching, then install and test fittings suited to each room.
Add focused light above an island or dining table, or softer illumination beneath cupboards and around shelving. We plan fitting positions, pendant heights and cable routes to suit your room and chosen lighting.
Light driveways and entrances when you need them. We position sensors to detect approaching visitors, adjust timing and sensitivity, and choose protected mounting locations to help prevent nuisance triggering and weather damage.
Make paths, steps and outdoor living areas easier to use after dark. We select fittings suited to exposure and coastal conditions, with protected cable routes and a layout that works for your garden.
Adjust lighting for cooking, relaxing or entertaining. We match dimmers to your LED fittings to avoid flicker and buzzing, with compatible smart controls available for phone access, timers and grouped lighting scenes.
Replace dated oyster lights, fluorescent tubes or bare fittings with modern LEDs. We check existing wiring, reuse suitable positions and discuss cover plates where needed, leaving each fitting securely installed and properly tested.
FIND YOUR FIT
Start with the room, then check brightness, colour, fitting size and compatibility.
Choose warm white for living areas and bedrooms, or natural white for kitchens. Compare lumens rather than watts.
Send your room photos and fitting details when you enquire.
Electrical work is easy to get wrong and hard to see once the walls are closed. Here’s what you get when it’s done properly.
FAULTS & REPAIRS
Most lighting faults trace back to a handful of causes.
Send a photo of the fitting and describe the fault.
A dimmer not made for LEDs, mixed brands on one dimmer, or a failing driver.
Often the driver, which may be replaceable separately.
Water in the sensor head or a failed sensor may be the cause.
Moisture in an outdoor fitting or a damaged cable needs investigation.
Careful installation, testing and handover
DONE PROPERLY
Clear advice, careful work and a thorough handover.
All lighting work is done by a licensed electrician and meets AS/NZS 3000 in full. The paperwork is in order if your insurer ever asks, or when the house goes on the market.
The quote is fixed once the layout is agreed, so there’s no hourly meter running while holes are cut. Decide to add another light on the day? It’s priced before it goes in, and the final bill matches what you approved.
Cutting into plaster creates fine dust, so furniture and floors are covered before work begins. Offcuts, packaging, and old fittings are taken away, and the room is vacuumed before you walk back in.
There are no subcontractors or crews. The person who looks at your ceiling plans the layout, installs every light and answers your questions afterwards, and small jobs can often be fitted in the same day.
FROM FIRST CALL TO HANDOVER
Clear steps from your first enquiry to the completed work.
Send photos of your room, ceiling and chosen fittings for a quote. Larger renovations and outdoor lighting projects receive a site visit.
We agree on fittings, light positions, dimmers and switching, then provide a written price listing every light before you book.
We protect floors, run cable and reuse suitable openings to minimise patching. Lights, switches, dimmers and sensors are tested, with a CCEW provided for new wiring.
CUSTOMER FEEDBACK
Selected feedback from Newcastle Electrical customers on Google.
★★★★★
“Great service and highly professional. Quick to respond and very fair pricing. Would highly recommend!”
★★★★★
“These guys arrived at very short notice and were quick and efficient in identifying the problem, restoring power and saving a lot of drama. Thanks heaps!”
★★★★★
“Efficient same day service! Very pleased – thank you!”
From older cottages in Adamstown and Lambton to new builds in Chisholm and Thornton, lighting is installed in homes across Newcastle, Lake Macquarie, Maitland, Port Stephens, Cessnock and Singleton. Need light installation near you somewhere else in the Hunter? Ask when you ring.
No suburbs match. Call 0450 406 450 to check if we cover you.
BEFORE YOU BOOK
Call or send your details if you have another question.
It depends on how many lights you need, whether you’re replacing existing downlights or adding new positions that need cable, how easy the roof space is to get into, and whether you’re supplying the fittings. Swapping halogens for LEDs in the same holes is the most affordable option. Photos of the ceiling are usually enough for a written quote.
If your downlights take a GU10 globe, yes. Switch off at the wall, let the globe cool, then push it in, twist a quarter turn and pull it out. Most newer LED downlights are integrated, with the light and fitting as one unit, so when one fails the whole fitting is replaced, and that’s a job for a licensed electrician.
As a rough guide, downlights under a standard 2.4 m ceiling are spaced 1.2 to 1.5 metres apart and about 600 mm in from the walls, so a 3 m by 3 m bedroom usually needs four. Kitchens and laundries need more for working light, while living areas often need fewer if you use lamps. The layout is worked out with you at the quote.
Most lighting jobs are finished in one visit. Swapping a handful of fittings on existing wiring is usually a morning’s work, and a whole-house halogen to LED changeover normally takes a day. New downlight positions, pendants or outdoor lights that need fresh cable take a little longer, mostly because of the cable runs through the roof.
Yes. Lights bought from a Newcastle lighting store or online are fine as long as they carry the RCM mark, which shows they’re approved for sale in Australia. If you can, send the model details before you buy, so the cutout size, IC rating, and dimmer compatibility are checked first.
Ready to retire the halogens, light up the driveway or finally hang those pendants? Text a photo of the room or the fittings you've picked to 0450 406 450, or call to talk it through. You'll get a layout and a written price before any work begins.
Ceiling fans and power points can be added on the same trip. See ceiling fan installation and power point installation.
Need help urgently?Call the 24/7 electrical enquiry line.0450 406 450